Rubber install
So did some more fixing on the TM 3024. When you close up the camper the two half set down on these rubber guards. They are located at the front tongue and the back bumper area. Saw a video of this guy that replaced his using rubber he got from Amazon. Search this; SBR (Styrene Butadiene Rubber) Sheet, 70 Shore A, Black, Smooth Finish, No Backing, 1/2" Thickness, 2" Width, 36" Length
This was an easy fix. Took the old rubber pieces off and used them as a template. Cut the rubber with a razor knife, drilled new holes, done. I also used some clear silicone on the bottom to help keep them in place. Works. I plan on doing the same thing to my propane cover. As it is rubbing on the metal and wearing off the paint.
|