Quote:
Originally Posted by brulaz
Thanks Wayne, that's what I'll do.
Bigbit, it sounds like you got a good one. Congrats.
|
When you do the 1st sanding, be sure to get rid of 100% of the shiny surface.
When sanding the primer, just a light hand sanding. All you want to do is remove the wax that comes out during the drying stage. Don't let the primer sit on there more than a couple of days without painting. A lot of people make that mistake. Primer attracts all sorts of contaminants (that's it's job) and if left too long, it does more harm than good.
Also remember not to try to put down thick coats. A thin coat of primer is fine. 2 thin coats of LP is a lot better than 1 thick coat.