Quote:
Originally Posted by Bill
And of course it is soft copper tubing, sold in rolls. Not copper water pipe, generally sold in 10-foot lengths. Be careful bending it, or it will kink. The pros can bend it by hand, but I would consider getting one of the inexpensive spring-type benders such as the Cobra kit 1/4-in to 5/8-in Tube Bender (Item # 636779 Model # PST073) from Lowes.
And once each joint is made, be sure to leak-test it with soapy water.
Bill
|
+2 on the benders for any tight bends. Don't forget to take the bender off before to flare the tubing.
I would get a flaring tool like this one if this is the only time you will be flaring. You should buy new female flare fittings for the tubing. But you can reuse the male fittings if they look good.
flare tool