I had a bad spot on the contact paper that was in the top right corner of our 2720sd, I then pulled off all the contact paper and found 1/4" plywood which the paper is glued to. I used 220 grit sand paper and an orbital sander and made wall very smooth , then primed with glidden gripper primer/sealer. then used Behr High gloss 100% acrylic tinted to a swiss coffee color.
the wall above the sink, I left the contact paper on, as it was not damaged but I wanted it to match that wall, so I used TSP, rinsed twice to make sure it was all off then repeated with same paint primer and then the high gloss. came out great. I am contemplating on painting the fold down bath wall, might just leave it alone.
__________________
Craig
One of the unknown ex-presidents
2008 2720SD
2008 Toyota Sienna XLE
2015 Prius v the money saver
|