Trailer position in garage.
When you have only limited space in your garage for the TM, carefully locate the TM where you want it, lay a 2x4 on the floor behind the tires, and mark it's location. Pull the TM out of the garage, put a couple of lag bolts thru the 2x4, so as to extend thru the board, drill a couple of holes in the garage floor to accept the lag bolts,(the holes should be just a little larger than the lags) then whenever you want to put the TM in the garage, drop the board in place, and back the TM in until it is stopped by the board. This method allows you to keep the floor clear, and safe from tripping on the board when you don't have the TM in " it's home." Sounds like alot of work but it's really not, and....it just might save you from some of the dreaded "Sheetrock repair." Works for me!!....Jim
|