Thread: Leveling Issue
View Single Post
Old 12-10-2007, 09:48 PM   #8
PopBeavers
Guest
 
Posts: n/a
Default

I have posted an answer many times. My short answer is:
1. drive onto planks/blocks to level side to side
2. chock both wheels front and back real tight to eliminate motion
3. level front to rear with tongue jack
4. crank jacks down until they touch ground snugly.

Definition of real tight on the chocks:

chock both wheels in the front.
pull forward a little
chock both wheels in rear
place in neutral and let it float to center

My definition of level is a little water in a frying pan on the stove. If you can fry eggs it is level enough everywhere else.
  Reply With Quote