[Shane826]

It could be part of the issue as there is a lot more weight hanging over the open end of the shell which could compromise the roof crown. But you can’t just move it… The A/C mounts over a 14”x14” hole on the riser. The only way you could posssibly (and I stress POSSIBLY) change it is to remove the A/C, skirt, and riser; and then rotate the riser 180° so the 14”x14” hole is further towards the front, then reassemble. But that might not even work since you’d also have to rotate the skirt 180° and then it would probably hang off the back edge.

I dunno. I’ve never seen that before.