BTW here is a "door page" for mine. Am not so concerned about frame flex normally, the shock if the 3500 axle hits a stop is going to be a lot harder on the frame and a 2x5" beam can take a lot of shear.
What is intersting is the "slipstreamed" changes that TM seems to have made, need to verify but think there is a wheel well change that may have accompanied the 15" wheel, will provide more info after I remove one of mine.
On that line does TM use an automotive model year or calalendar, or "something else" ? If automotive then my April '06 would be considered "late production".
ps I'd put the roof AC with ducts and air handler at closer to 125 lbs than 60
__________________
Looking for a 24/17 in or near Florida.
|