Error correction. In this post, I copied the TM factory parts list for torsion bars, and noted that they come in two lengths. I surmised that the short bars were for the rear of the TM, and the long bars were for the front. That is not correct. As Bruce suggested in the next post, all the bars on my trailer are 82 inches long. I don't know what the 63 inch bars are for, through Bruce's guess that they are for the smaller Sport model trailers makes sense. I have corrected the info below.
Bill
According to the factory parts list, torsion bars come in pairs, left and right.
Two lengths appear in the list - 63" and 82"
The short bars come in four diameters - 1/2", 9/16", 5/8" and 11/16"
The long bars come in three diameters - 11/16", 3/4", and 13/16"
Summary (corrected):
SHORT BARS (63 inches)
Part# L,R - Diam
40013,4 - 1/2
40015,6 - 9/16
40019,0 - 5/8
40021,2 - 11/16
LONG BARS (82 inches)
Part# L,R - Diam
40011,2 - 11/16
40017,8 - 3/4
40023,4 - 13/16
Bill
|