TrailManor Owner's Forum  

Go Back   TrailManor Owner's Forum > TrailManor Owners Community > Prospective Owner Questions
Register FAQ Members List Calendar

Reply
 
Thread Tools Display Modes
Old 06-18-2018, 12:39 PM   #11
Shane826
TrailManor Master
 
Shane826's Avatar
 
Join Date: Aug 2015
Location: Rochester, NY
Posts: 1,900
Default

Someone here insists on not using a WDH because they are so close to capacity on the TM axle and don’t want to redistribute any weight onto that axle. That said, I highly recommend using one.
__________________
2007/21 TM 3326 (Pride of the Fleet)
2000 2720SL (Rebuild Project)
2002 2619 (Parts TM)
SMARTER THAN GOOGLE!
Shane826 is online now   Reply With Quote
Old 06-19-2018, 02:54 PM   #12
MBushaw
Site Sponsor
 
Join Date: Jun 2018
Posts: 23
Default

Thanks guys
Good news is that it looks like I got the 5000 lb axle with the 40 gallon water tank. Torsion suspension, 12 inch hubs and 6 lug wheels, ez lube bearings. Now I need to pull a hub to see if I got the auto adjust brakes and what condition they are in.
This takes a lot of the concern for overloading the trailer axle away.
With everything I read about TM published weight being way low I was just too nervous about shifting weight to the trailer until I knew it could handle it. I knew the f150 could safely deal with the tongue load for this trip.
__________________

2008 3023 TM. 2013 F150 3.7 TV
MBushaw is offline   Reply With Quote
Old 06-20-2018, 04:51 AM   #13
eddugo
Senior Member
 
eddugo's Avatar
 
Join Date: Jul 2013
Location: Big Bend area of Florida
Posts: 162
Default

I would check the capacity of the truck hitch and the ball mount, then check the draw weight. My 2011 F-150 hitch had 500 pound tongue weight capacity (stamped right on the hitch) and so did the ball mount. My 09 2720 has aver 600 pounds draw weight. Bought an Anderson WDH.
__________________
2009 2720SL
15" Tire Upgrade
Lift Kit
Anderson WD hitch
2016 Ford T-150 Transit Van
Ecoboost
eddugo is offline   Reply With Quote
Old 06-20-2018, 01:09 PM   #14
BrucePerens
TrailManor Master
 
Join Date: Jan 2014
Posts: 893
Default

Quote:
Originally Posted by MBushaw View Post
Thanks guys
Now I need to pull a hub to see if I got the auto adjust brakes and what condition they are in.
Get new seals before you pull the hub. The old ones are no good after being removed. Also something to go under the axle and keep dirt away, a few rolls of paper towels, a can of brake cleaner, a grease gun and two full tubes of grease. It will take most of one to push the old grease out of the channels in the axle while the hub is off, and then put more grease in the bearings once the hub is back on.
__________________
Bruce Perens K6BP - 2004 TM 3023, 2015 Jeep Grand Cherokee.
My Trailmanor Customizations
BrucePerens is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
2008 3023 Touch up Paint- Need Help leyva33 Interior 0 09-04-2017 12:35 PM
2008 3023 Water Heater Question leyva33 Plumbing 1 05-28-2014 02:04 PM
2008 TM3023 vs 2010 TM3023 gpziggy Prospective Owner Questions 14 03-03-2010 09:21 PM
Will a 3023 fit in my garage? clgish Prospective Owner Questions 16 12-05-2006 06:15 PM
Assistance with Buying Decision MissingTheNW2001 Prospective Owner Questions 3 06-13-2005 07:59 PM


All times are GMT -6. The time now is 05:53 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 2022 Trailmanor Owners Page.