What brand/model of Stabilizer Jack for a TM 2023?

[Bill]

If you have a come-along, you can probably straighten the bent jack. Cheaper than a new jack, and handy to have on hand for a lot for other things.

Bill

[Rob Culver]

Originally Posted by Bill

If you have a come-along, you can probably straighten the bent jack. Cheaper than a new jack, and handy to have on hand for a lot for other things.

Bill

Thanks Bill. Tried to straighten it but probably not worth it since the screw is a bit bent also.

[Kidkraz]

Have you checked with the factory? They should be able to give ya which brand they use/used and a price if you want to go thru them. Your not bound to buy, but knowing their price with shipping will let you decide where you want to buy it from. I replaced my old one with the BAL from Amazon. I discovered that I did NOT have to pull the frame mount, I just took the top bolts off, slipped the new jack links on to that mount. Way easier, since the new jack mount holes did not align with the BAL jack. Other than the frame mount, the big thing is drive screw attachment. Does it use a socket or a J-hook to bring it up or down?


Parts/Service Text or Call 605-999-9605