Hi, I'm not sure if I'm doing this right but I was wondering if you have advice on how to rebuild the legs. I managed to mess them up (ok, it was probably my son but he's not here for me to interrogate at the moment) and they are both jammed with the sliding channel inside and I've manage to pull off the t-bar, spring and rubber foot. Should I just unscrew them from the tables and try to pop them back together? The first thing I noticed is these aren't standard screws so I'll look for a tool that'll work. I've only used the camper a couple of times and didn't really pay attention to the sliding bars before. Are there diagrams available? I have a 2720SL.
Thanks!
Quote:
Originally Posted by Padgett
Agree except with the 070 you pull the T-bar to disengage the button and then it slides freely. Agree it only needs to collapse an inch or two. There is a stop at the end of the leg to keep it from going in too far and this can jam if insistant..
There are four pieces to the 070 leg. The fixed channel with mount, the sliding channel with the rubber foot, the T-bar and the spring with the lock button. On the one leg the latter two were missing entirely but on the other they had seperated and I was able to rebuild the assembly. So now I have a spare. I like having spares.
TM did put all eight screws in each mount to fasten to the table which was a plesant surprise, suspect some "lesser" manufacturers might have just used four.
|