TrailManor Owner's Forum  

Go Back   TrailManor Owner's Forum > TrailManor Owners Community > TrailManor Technical Library
Register FAQ Members List Calendar Mark Forums Read

 
 
Thread Tools Display Modes
Old 08-31-2011, 12:55 PM   #1
wbmiller3
Site Sponsor
 
wbmiller3's Avatar
 
Join Date: Oct 2004
Location: Southeast of Houston, Texas
Posts: 1,089
Default Retrofitting the lift kit - in words and pictures

This turned out to be fairly easy but I encountered a few hiccups along the way. So, in the spirit of helping out the next guy, here is how it went.

I wanted to do the job in the garage so that I could do it over a span of days and leave things half-done (I wasn't comfortable leaving it that way in the driveway with the little kids in the neighborhood playing in the street!), and to be in the shade. This sounded like a better idea than it turned out to be because I had not originally planned to take the wheels off. Once it became clear that I had to take the wheels off - the original bolts were TIGHT and I needed better access than I could get with the wheels in place - this was a bit of a struggle since I couldn't open the trailer in the garage. I was able to raise the front shell part way and get the wheels off eventually.

First, here is the lift kit right out of the box.
Next, here is the original joint between the frame and the axle. Thank goodness mine was not welded.

So, job 1 was to break loose the original bolts (they are 15/16th bolts by the way. I had a 15/16 socket but not an open end wrench, so that was a trip to Lowes.) The first try I could not budge them. I applied some liquid wrench and let it sit overnight. The next day I was able to break them loose with some banging on the open end wrench with a block of wood and a hammer, and with liberal application of my #12 dog remover (i.e. my foot).

Once I had the nuts broken loose I lowered the trailer till the axle was resting on some sturdy milk crates and 2x4s. I also chocked and supported the wheel hubs. (A lot of the work in this entire project was simply cranking the trailer up and down. It was very convenient to have the scissor jacks at each corner to help out!) Once everything was secure, I loosened the original nuts all the way. I am paranoid about working under anything and I especially didn't want any energy release when I removed the nuts - like the axle falling on me or shifting suddenly. So I made sure to support it well. This worked great and all 4 bolts came out without any binding and the axle stayed put.

Job 3 was to raise the trailer two inches plus to make room for the lift kit (3rd photo). More work on the tongue jack and the scissor jacks and you see the result.

This was the moment of truth. My biggest fear about the whole project (other than being crushed under the trailer) was that the holes in the lift kit would not line up with the holes on the trailer. My trailer is 10 years old after all, and I've been burned by some other parts changes from TM. However, it fit perfectly.

The rest was easy. Just tightening up the bolts on both sides - super tight like the original ones - and replacing the wheels. One final jack-down and I was done. Next week I will start working on moving up to the 15" wheels and tires.
Attached Thumbnails
Click image for larger version

Name:	lift-kit.JPG
Views:	1193
Size:	65.0 KB
ID:	12401   Click image for larger version

Name:	original.JPG
Views:	1122
Size:	57.3 KB
ID:	12402   Click image for larger version

Name:	2-inch-lift.JPG
Views:	1061
Size:	58.2 KB
ID:	12403   Click image for larger version

Name:	moment-of-truth.JPG
Views:	1056
Size:	63.8 KB
ID:	12404   Click image for larger version

Name:	final-result.JPG
Views:	1164
Size:	60.2 KB
ID:	12405  

__________________
Bill
https://spaceflight.training
https://www.facebook.com/wbmiller3
2018 F150 towing 2001 2619; lift kit & 15" wheels
wbmiller3 is offline  
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Retrofitting the lift kit - in words and pictures wbmiller3 Frame 9 05-21-2012 03:38 PM


All times are GMT -6. The time now is 08:29 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 2022 Trailmanor Owners Page.