Thanks for that. I threw out the French version of my manual, not realizing all the schematics are at the end of it.
Yes, I see now that the AC heater is different and labelled A in the diagram. And F is the "Divider Heater" and it's connected to 7 "Divider +12VDC", so it's definitely a 12VDC heater.
And just to amplify what you've already said, this is (according to the manual) a:
"Moisture reduction heater:
The refrigerator has a heater that prevents moisture from forming
on the center divider between the doors of the freezer and the
fresh food compartment. The heater operates only when the
refrigerator is ON."
So I guess that the 0.6A I measured when the frig was on propane included this little heater.
Not sure if it's worth the trouble to see what happens when it's disconnected. It looks like it's wires come from P1 on the power board and then go to the display board internally. Might be able to get at P1 from the rear ...
|