Quote:
Originally Posted by Kmikesell
Upon further reflection, I may have done this to myself. About 6 months ago, when returning from a weekender, my bargman cable got loose and drug on the ground, wearing away several of the internal wires. I "spliced" them as a repair.... Now I'm thinking that i did an inadequate job and there is a short some where in my repair. Maybe I should Just replace the entire cable as a start. Thoughts?
|
You don't have to replace the entire cable. I had the same problem on a cargo trailer that I bought the precious owner tried to splice the cable.
I bought this cable and put wire end connectors on where I cut the original cable at the frame. Then it's just a matter of putting the right connectors on the proper terminals in the box.
https://www.amazon.com/Snowy-Fox-Tra...8&sr=8-14&th=1
Threaded Mode
