Torsion arm support brackets loose from body
We just picked up a 2922KB (2014) and on our night stop during the ~14hr drive home from the rv dealer (that has no prior experience with TM) we noticed that the difficulty we experienced closing the rear enough to fully lock was due to supports separating from underneath frame. The bolts look rusty and are spinning internally when I rotate them. In a 2014, what sort of structure is on the inside and how do I gain access to this? It looks to be closed off underneath the trailer as well as behind the stove. Given our situation we resorted to using a jack to raise the drooping bracket in order to be able to make it home.
|
Threaded Mode
