KB7OUR

My thought on the panels is to use actual wall paneling (cut with a jig saw or small coping saw) with dense blue foam padding sandwiched between 2 pieces and held together with some kind of glue that would work with the foam. Since the panels are so small this would not add much weight, but would be fairly rigid to stay in place. Also considering some means to hinge them in place into the ceiling if there is enough clearance when the TM is folded (need to research this). When you're ready to close up, just hinge the panels upward toward the ceiling then fasten them with a strap which has a snap on it. That's the idea and of course at this point it's no more than just that until I do a feasibility test.

Wade