|
10-13-2018, 09:27 AM
|
#1
|
New Member
Join Date: Jun 2018
Location: Williamsburg, Virginia
Posts: 2
|
Need New AC unit
A large tree limb fell about 100 feet Thursday night and chose our trailer as a landing zone. The AC unit seems to have taken one for the team. The limb skewered the Air Conditioner and we need to replace it. Just looking for recommendations for a replacement. I would assume weight, power load and size would be an issue. We have a 2007 2720 sl. The good news is that it looks like the rest of the trailer is okay, a few dents but nothing went through the top as far as we can tell and the trailer seems to open without issues.
|
|
|
10-13-2018, 11:27 AM
|
#2
|
TrailManor Master
Join Date: Aug 2015
Location: Rochester, NY
Posts: 1,891
|
Atwood Air Command 15026 (white) or 15026 (black).
15k BTU cooling power, low amp draw, quiet, includes heat pump. Also will need Atwood 15021 ceiling unit.
__________________
2007/21 TM 3326 (Pride of the Fleet)
2000 2720SL (Rebuild Project)
2002 2619 (Parts TM)
SMARTER THAN GOOGLE!
|
|
|
10-13-2018, 01:53 PM
|
#3
|
TrailManor Master
Join Date: Jan 2014
Location: Somerset, OH
Posts: 1,868
|
I would get the heating coils or heat coil ready, with my new units. Much cheaper then a heat pump. We have the heat coil with our unit and it does a nice job down into the mid 40's. If we have electric, we only use AC heater during the day. Night we use a small electric heater because it much quieter.
__________________
Art & Joyce
Current camper: Motor Home
Previous: 2009, 3023-QB and 2003 2720
|
|
|
10-13-2018, 02:37 PM
|
#4
|
TrailManor Master
Join Date: Jan 2014
Posts: 893
|
Quote:
Originally Posted by tentcamper
I would get the heating coils ... Much cheaper then a heat pump.
|
Huh? Are you saying that resistive heating is less expensive to operate than a heat pump? I don't think so. Or just that the acquisition cost is less?
Everyone seems to like that Atwood because it's quiet and has a relatively low power drain. You might also consider a soft-start kit like the Micro-Air.
|
|
|
10-13-2018, 04:25 PM
|
#5
|
TrailManor Master
Join Date: Aug 2015
Location: Rochester, NY
Posts: 1,891
|
The chill chaser coils will work regardless of the temp but they don’t put out much heat. Whereas a heat pump only works down to about 50°. But now way is the chill chaser coils efficient in any sense of the word. Not that it REALLY matters, as you’d need 110V AC electric to run either.
On an unrelated note, I’m seriously thinking about ipgrading to the Atwood. My original A/C works fine but I just found I have a leaky base seal. If I’m gonna R&R the A/C I have to seriously consider upgrading while I’m in there. Gonna have plenty of time to think about it as she’s going into the garage for the winter soon. But if I do the upgrade in the spring I’d sell the original A/C cheap.
__________________
2007/21 TM 3326 (Pride of the Fleet)
2000 2720SL (Rebuild Project)
2002 2619 (Parts TM)
SMARTER THAN GOOGLE!
|
|
|
10-13-2018, 07:52 PM
|
#6
|
TrailManor Master
Join Date: Jan 2014
Location: Somerset, OH
Posts: 1,868
|
Quote:
Originally Posted by BrucePerens
Huh? Are you saying that resistive heating is less expensive to operate than a heat pump? I don't think so. Or just that the acquisition cost is less?
Everyone seems to like that Atwood because it's quiet and has a relatively low power drain. You might also consider a soft-start kit like the Micro-Air.
|
No I'm not saying that it cheaper to operate. To me it's the same cost because I don't pay for the electricy usage when camping. It comes with the CS.
I'm saying it's much cheaper to buy a new unit with the heat coils than a heat pump.
__________________
Art & Joyce
Current camper: Motor Home
Previous: 2009, 3023-QB and 2003 2720
|
|
|
10-13-2018, 09:31 PM
|
#7
|
TrailManor Master
Join Date: Jan 2014
Posts: 893
|
The main goal, IMO, is to avoid the built-in furnace, which is unpleasantly loud. The Atwood is relatively quiet and comes with a heat pump in the base model, so it sounds like a good deal. Probably rather than a resistance heater in the air conditioner we should just plug in a separate resistance heater. They're quiet.
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
All times are GMT -6. The time now is 04:51 AM.