Weight distribution hitch use with swing hitch?

JBhaven · 09-29-2019, 06:36 PM

Hi All, We are receiving our new 2020 model 2720QD this week. It has the swing hitch installed from the factory. Question, Can I use something like a Blue Ox weight distribution hitch on our new Trailmanor with the swing hitch?
We are super excited about getting our trailer and want to be sure we don't damage it with a weight distribution sway control hitch. Any suggestions. Some say we don't need sway control at all, but I sure would feel better having it. We tow with an old 1997 GMC Sierra that is in pristine shape with 59,000 miles on it. I would not hesitate installing a Blue ox hitch, but don't know if the swing part of the trailer frame makes it an issue.
Thanks to all who would share knowledge on this subject.
John

**Kwantau** · 09-30-2019, 07:25 AM

When I bought my 2011 TM from the factory I installed a Blue Ox which I used for about 5 years. It is a great hitch with only one drawback, It is very heavy. The head that goes into the receiver on your TV is about 100 lbs and that you still have the two bars and brackets that install on the frame of the TM. It adds that extra head weight to your TV. I used the hitch for 5 years and the changed over to a Anderson hitch on my brothers recommendation, as he was using the Anderson on his TM. I never looked back. The Anderson hitch total weight is 60 lbs. The head also holds the antisway device. Since I was not getting any younger lugging that 100 lb Blue Ox head around was getting to much for me. Look up the Anderson Hitch on their website and they give you a great explanation as to how it works. Good luck with your TM.

**Bill** · 09-30-2019, 10:00 AM

Over the Forum's many years, the only issue that has ever surfaced with using a WDH with the TM swing tongue is that on some non-standard hitches (I seem to recall Curt?), the springbar has a non-standard length, and the tips end up just below the swing tongue hinge. This makes it impossible to mount the spring bar hanger bracket on the TM A-frame. But this issue has come up only once or twice in 20-odd years.

Regarding sway. A WDH in itself does not prevent sway. But as you probably have read here, TMs are designed and built not to sway, so no anti-sway mechanism is required. Some WDHs have built-in sway control, and there is nothing wrong with that, but you are paying for something you don't need.

The cost of a WDH varies widely. Before you take a second mortgage on your house, I would go to pplmotorhomes.com or eTrailer.com, read their tutorials about WDHs in general, and browse through their selection. Many of us use a plain unadorned trunnion WDH from Reese or similar, with 600 pound springbars. It is hundreds less than the fancy ones.

There are also good tutorials from our towing experts here on the forum. Look in the TM Tech Library at

https://www.trailmanorowners.com/for...splay.php?f=42

Bill

eddugo · 09-30-2019, 10:45 AM

I am also a big fan of the Anderson. Been using mine for six years. If you have the horizontal front tanks, you may have a problem with the lower frame being too close to tighten the chains. If you search "Anderson Hitch" on this forum, you will see what I had to do to get mine to work. Also, I own a Blue ox and do not use it because I think the Anderson is much better.

**Bill** · 09-30-2019, 02:52 PM

I'm not sure about this, Ed. The WDH swing-up bracket is outside the A-frame - the horizontal tanks are inside. I ran with a Reese WDH, swing tongue, and horizontal tanks, for almost 15 years. No problem at any time. Do you have a specific example of this problem? It might help a lot of people.

Bill

simoesxp · 05-03-2022, 09:38 AM

I am getting a similar setup as yours, which model of Andersen Hitch do you have? I am getting a 2022 Jeep Grand Cherokee Ltd 4x4 with towing package (no 3rd row) and a 2010 Trailmanor 2720 SL, trying to figure out which hitch model I should order for our maiden trip when we pickup the TM 600 miles away. All I kow is that then TM has a 2 inch receiver coupler.

Quote:

Originally Posted by Kwantau

When I bought my 2011 TM from the factory I installed a Blue Ox which I used for about 5 years. It is a great hitch with only one drawback, It is very heavy. The head that goes into the receiver on your TV is about 100 lbs and that you still have the two bars and brackets that install on the frame of the TM. It adds that extra head weight to your TV. I used the hitch for 5 years and the changed over to a Anderson hitch on my brothers recommendation, as he was using the Anderson on his TM. I never looked back. The Anderson hitch total weight is 60 lbs. The head also holds the antisway device. Since I was not getting any younger lugging that 100 lb Blue Ox head around was getting to much for me. Look up the Anderson Hitch on their website and they give you a great explanation as to how it works. Good luck with your TM.

Shane826 · 05-03-2022, 01:18 PM

If your TM has a 2” ball (98% chance it’s 2” but verify with current owner), you should want the 3324 model Andersen WDH (2” ball, 4” drop/rise)... That's what I have and it’s worked with my GMC Envoy and Ram 1500 pulling my 2007 3326. I think they all have the same size shank.

Wavery · 05-03-2022, 05:27 PM

Quote:

Originally Posted by Shane826

If your TM has a 2” ball (98% chance it’s 2” but verify with current owner), you should want the 3324 model Andersen WDH (2” ball, 4” drop/rise)... That's what I have and it’s worked with my GMC Envoy and Ram 1500 pulling my 2007 3326. I think they all have the same size shank.

I thought the same thing. I just (today) bought one off Craigslist for $200. It had a 2.5" Shank. I have to buy a new shank and ball but I still come out under $400.

JBhaven · 09-30-2019, 03:16 PM

Thanks to everyone for all the info. I ordered the Andersen model 3324 today and hopefully it will fit properly. If not, I will have to figure out how to make it work. The lack of weight was a no brainier over the blue ox. I sold my blue ox with the Lance model 1685 we had recently. We loved the Lance and this trailmanor adventure will hopefully work out for us. We had issues with storing the Lance, so parking the trailmanor in the garage was/is very appealing. The fast responses to my question show this is an awesome group of people. Thanks again for the insight and sharing of experience. In sure I will have a bunch more questions as our adventure unfolds. John.

**Kwantau** · 09-30-2019, 06:51 PM

Once you have the hitch brackets sitting in the proper place and distance from the head you might have to add a extra link to your chains which is easy to do. It does not matter to lengthen the chains or shorting them. It is more important to have the brackets sitting in the right place and not interfering with slide outs or propane bottles. The chain extenders can be found at most reputable Hitch Shops. With the adjustment nuts all the way backed off, your chains should be just slack so that you can get your angle bracket attached to your head without any problem. One thing that Anderson recommends is that once you have the brackets in the right place is to have a small weld bead run at one side of the bracket to the TM frame so that the brackets don't move due to the tremendous tension on the chains. The brackets are held on by a lower and upper bolt around the frame. Hope this is not to much info but if you need more help this forum is the place to come to.