Eric:
I Welded A Reciever On The Back But Only After I Welded A Additional Brace
Along The Back End Of The Tool Box For Additional Support . I Moved The
Spare To The Front Welded It Place & Repositioned The Lp Tanks At An Angle To Match The Spare. This Allowed Me To Retrofit The Bike Rack Right Off The
Bumper Intstead Of Hanging It 12 To 18 Inches As Per The Swagman Original
Design Called For . By Moving The Spare To The Tongue I Was Able To Redistribute The Wieght To Allow For 4 Adult Bikes And The New Holding
Tank System I Designed For My Camper. I Have Noticed Less Drag When Towing With The Spare Up Front And The Tanks To Match. Yendor
|
Threaded Mode
