![Reply](https://www.trailmanorowners.com/forum/images/buttons/reply.gif) |
|
08-10-2012, 01:29 PM
|
#31
|
Site Team
Join Date: Feb 2003
Location: The mountains of Scottsdale, AZ, and the beaches of Maine
Posts: 10,175
|
Quote:
Originally Posted by tgpmd1
I know that this thread hasn't been used in awhile, but was wondering for those that installed rolling shelves, did people use the full extension or just the regular slides? I'm looking at purchasing from shelvesthatslide.com, or see if they have the right sizes on their ebay store.
|
As noted in my Album on the topic
http://www.trailmanorowners.com/forum/album.php?u=12
I used the K&V Model 1805 slides from Lowes or Home Depot. These are identified on the K&V website as "3/4 extension roller slides".
Hope this helps.
Bill
|
|
|
12-05-2012, 11:00 PM
|
#32
|
Guest
|
Quote:
Originally Posted by trisht
Hi -- I bought all of our drawers on eBay and I'm almost positive they were the standard regular slides. I installed them about 3 yrs ago and they're still working well.
Good luck!
Trish
|
Very cool. and a no - brainer to spend the money and have them be right.
Can you please post the correct dimensions - based on your model - for others that want to order from them.
thanks.
|
|
|
07-14-2017, 08:44 AM
|
#33
|
Senior Member
Join Date: Sep 2016
Location: Grand Rapids, MI
Posts: 207
|
Drawer #1 measurement
Bill,
In your measurements on page one of your information about 2720 measurements you say that the width of drawer 1 is 20 1/16. On page two you say the width is 20 9/16. This is a half inch difference. All the other drawer measurement match between page one and page 2. Do you know which is right? Is it 20 1/16 or 20 and 9/16?
|
|
|
07-14-2017, 10:03 AM
|
#34
|
Senior Member
Join Date: Mar 2012
Location: Houston, Tx
Posts: 93
|
Drawers from Container Store
__________________
On the road again...
Retirement: Second childhood with no adult supervision ;)
[SIGPIC]http://www.trailmanorowners.com/forum/image.php?type=sigpic&userid=8372&dateline=1403045 022[/SIGPIC]
2010 Sport Trac -> 2009 2720SL
Travel accessories: Dobro style resonator guitar, Mandolin, Guitar
Albums
|
|
|
07-14-2017, 10:17 AM
|
#35
|
TrailManor Master
Join Date: Jul 2013
Location: White Mountains of New Hampshire
Posts: 428
|
Quote:
Originally Posted by grubbyjeans
|
Ohhhh! I quite like those! I may have to rethink my stance about not building drawers for the cabinets.....
__________________
Holly
2005 Trailmanor 3023 - 2016 Ford Expedition Limited w/ Eaz-Lift WDH
|
|
|
07-15-2017, 07:58 AM
|
#36
|
Site Team
Join Date: Feb 2003
Location: The mountains of Scottsdale, AZ, and the beaches of Maine
Posts: 10,175
|
Casey -
Sadly, I don't know which is right, and I replaced that particular trailer with a newer one long ago. My guess is that the 9/16" dimension is right, based on the info on page 4. But please remember my advice to measure all pieces to fit your trailer, not mine. I did not intend, and would not expect, the information to provide a cut-and-paste operation. None of it is difficult, though, so you should be able to do it easily.
Bill
Quote:
Originally Posted by Casey Freswick
Bill,
In your measurements on page one of your information about 2720 measurements you say that the width of drawer 1 is 20 1/16. On page two you say the width is 20 9/16. This is a half inch difference. All the other drawer measurement match between page one and page 2. Do you know which is right? Is it 20 1/16 or 20 and 9/16?
|
|
|
|
07-16-2017, 02:39 AM
|
#37
|
Site Sponsor
Join Date: Jun 2003
Location: Santa Cruz County, CA
Posts: 2,405
|
Bill's cabinetry improvements are top notch! I didn't have the time to look for and install (or get DH to install) that kind of a slide, so i went low-tech. I bought some small plastic serving trays, turned them upside down and stacked them on the floor inside the cabinet so that they matched the height of the bottom of the cabinet opening that they were inside, and just used some plastic bins that easily slide in and out on top of the trays. I have this arrangement under the sink and under the oven. Under the sink we have bowls, plates, and platters in one bin. Down below there are drinking glasses and coffee cups. Under the oven there are various items, racks, pan lids, coffee maker, baking pans etc.
It works for us. Now that I have knee problems I really appreciate having those slide-out bins. I also like that the contents are contained within the bins and can be taken out for cleaning and restocking.
Behind the bins under the sink I keep a bottle of laundry detergent and a metal lunchbox with various repair parts. Those, I have to get down on the floor to retrieve.
__________________
'97 2720 & '01 Chevy Silverado 1500 4x4
2011 & 2017 Prii, 10'x18' & 10'x9' Tents
|
|
|
![Reply](https://www.trailmanorowners.com/forum/images/buttons/reply.gif) |
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|