|
|
12-18-2015, 02:33 AM
|
#11
|
Senior Member
Join Date: Jun 2012
Location: maryland
Posts: 55
|
Quote:
Originally Posted by klpauba
I considered the BAL Leveler but opted for the "Andersen Camper Wheel Chock and Leveler" instead. First thing I do when I reach the camp site is to determine the low side (based on the bubble level on the electric jack). I put the leveler under the wheel on the low side and inch the vehicle and trailer forward until it's level (in the street-to-curb direction). When leveled in the one direction, I chock the leveler and the other wheel, disconnect the TV and level the trailer fore-and-aft (using the electric jack). Finally, the stabilizers are cranked down.
I'm guessing this is quicker and easier than jacking up the low side another way.
|
Ditto for me. I camp alone much of the time , I own both, but since going to 15 " tires BAL is useless. I like the Anderson Leveler.
__________________
2006 2720SL,2" lift kit,Twin 12 V Batteries
Twin Yamaha 2000si Generators
Two 100 watt Renology Solar Panels
2007 Chevy Silverado/w cap
|
|
|
12-18-2015, 06:20 AM
|
#12
|
Site Sponsor
Join Date: Nov 2010
Location: Calgary Alberta Canada
Posts: 199
|
Same for me, have used the Anderson leveller for 2 seasons now and just love it. Easy and fast to use.
__________________
Hans & Riet
TV 2017 Jeep Grand Cherokee, 6200 lbs tow capacity, 620 lbs tong weight, V6-3.6 liter gas with factory tow package, Prodigie3 Brake Control, Anderson "No-Sway" Weight Distributing Hitch.
TM 2720, 2011, A/C, Awning, Swingtongue, 40 Gal fresh water, Stove and Sink Cupboards, Radio/CD Player, TV ant., Microwave Oven, Electric Tongue Jack, Black Windows and Frame, and Woodgrain Vinyl Flooring
|
|
|
12-18-2015, 09:34 AM
|
#13
|
Senior Member
Join Date: May 2012
Location: Eden Prairie, MN
Posts: 121
|
Anderson Leveler
A BIG YES for me too. Works really well and easy to use. In fact I have one brand new and in the box for $40.00 plus shipping. Why you ask? I ordered two for our 3326 TM tandem axle and found out that it does not fit between the wheels so it works just great with the one. I added a "Large" level on the front of the TM so I can see it in the rear view mirror so I can pull up to the exact spot by myself but it is easier with two.
__________________
[SIGPIC][/SIGPIC]
2007 3326 King (3rd Owner)
Toyota 4Runner V8
WDH, Rear receiver for bikes,
Hual-a-vator for Kayaks
Norman & Elizabeth
|
|
|
12-18-2015, 03:02 PM
|
#14
|
TrailManor Master
Join Date: Apr 2012
Location: Centennial, Colorado
Posts: 888
|
All the big levels I find are black or grey. I want a white one, but have not found one, as of yet. Since the TM is white, I don't want a big black level on the front.
|
|
|
12-22-2015, 06:12 AM
|
#15
|
TrailManor Master
Join Date: Oct 2015
Location: Sunny Arizona
Posts: 751
|
I tried my bal leveler that I used to use on the popup, it works great and fits the 14" tires well. plus doubles as a good wheel chock. lifted the TM with no problem.
__________________
Craig
One of the unknown ex-presidents
2008 2720SD
2008 Toyota Sienna XLE
2015 Prius v the money saver
|
|
|
12-22-2015, 08:34 AM
|
#16
|
TrailManor Master
Join Date: Nov 2008
Location: Chicago, IL
Posts: 1,063
|
The BAL will work on the 15" wheels, but really only if you pull up onto a block, like a lynx leveler, first. Then the BAL will easily slide under and be usable.
I had one, I did this for a long time. Then, I stopped, because the BAL screw started skipping and stripping, and it was a hassle. I moved back to a 3-step leveler, put a level gauge on the front of the TM, and just back up the steps until I'm close. Finish it with the corner jacks. Much faster and easier than the BAL, for my purposes. But I used the BAL for 2 years before, so there's nothing wrong with it.
__________________
2009.5 2720SL
2006 Toyota Sienna
2018 Audi Q7
|
|
|
12-22-2015, 12:04 PM
|
#17
|
TrailManor Master
Join Date: Oct 2015
Location: Sunny Arizona
Posts: 751
|
Quote:
Originally Posted by ThePair
The BAL will work on the 15" wheels, but really only if you pull up onto a block, like a lynx leveler, first. Then the BAL will easily slide under and be usable.
I had one, I did this for a long time. Then, I stopped, because the BAL screw started skipping and stripping, and it was a hassle. I moved back to a 3-step leveler, put a level gauge on the front of the TM, and just back up the steps until I'm close. Finish it with the corner jacks. Much faster and easier than the BAL, for my purposes. But I used the BAL for 2 years before, so there's nothing wrong with it.
|
I have heard the screw does strip out if using a power tool to do it. I figure I have it , might as well use it, save a little cash along the way for other TM fun things. Lol
__________________
Craig
One of the unknown ex-presidents
2008 2720SD
2008 Toyota Sienna XLE
2015 Prius v the money saver
|
|
|
12-23-2015, 09:16 AM
|
#18
|
TrailManor Master
Join Date: Nov 2008
Location: Chicago, IL
Posts: 1,063
|
Quote:
Originally Posted by Craigrrr
I have heard the screw does strip out if using a power tool to do it. I figure I have it , might as well use it, save a little cash along the way for other TM fun things. Lol
|
Yep. I used a power tool -- too much work doing it manually, took too long for me.
__________________
2009.5 2720SL
2006 Toyota Sienna
2018 Audi Q7
|
|
|
12-23-2015, 09:40 AM
|
#19
|
TrailManor Master
Join Date: Jan 2014
Location: Somerset, OH
Posts: 1,868
|
We like the Lago type blocks, with an integrated chock. We set them up when pull into ther cs by reading the level stuck on the camper. Set up the blocks with a chock to stop us when positioned. Backup or pull forward and we are done.
There are so many uses for the blocks. Use for leveling the table, under the stabilizers when they will not reach the ground, build a step when the first step is to far off the ground, use under a flat tire to reduce how much you have to jack, etc...
__________________
Art & Joyce
Current camper: Motor Home
Previous: 2009, 3023-QB and 2003 2720
|
|
|
12-24-2015, 05:23 PM
|
#20
|
TrailManor Master
Join Date: May 2011
Location: Buffalo NY
Posts: 342
|
I use the BAL each time I camp. You just have to put one leveler block under the low tire to accommodate the 15" tires. It's a great wheel chock and allows a perfect level
__________________
2011, Model 2720SD, 13.5k btu Dometic Low Profile Penguin II with a user installed Easy-Start modification, "Jack" TV Antenna, 15" Goodyear Marathon 225/75R15D Tires on Alloy Wheels, Swing Hitch, Electric Tongue Jack, Front Window (now an option). Powered with a Honda 2000i or 3000 handi (depending on the weather) generator when dry camping. Powered with two 6V Trojan T145 batteries when I need to run silent and deep. TV = 2016 Toyota Tacoma Double Cab w/ WDH.
Home Port: Western New York.
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|