|
|
07-11-2022, 04:41 PM
|
#11
|
Site Sponsor
Join Date: Oct 2021
Posts: 15
|
Quote:
Originally Posted by Wavery
This is the Sanyo mini-fridge/freezer that we found. There are many others on the market that will fit in that hole. This one will need some trim work.
|
Thanks for the model info. I was looking at some 3.2 cu ft models, but if a 4.5 will fit, might as well go for that. Trim work won't be an issue.
__________________
2003 3124KB towed behind a 2010 VW Touareg TDI
|
|
|
07-11-2022, 05:43 PM
|
#12
|
TrailManor Master
Join Date: Jan 2022
Location: San Diego, California
Posts: 2,928
|
Quote:
Originally Posted by Cya3124
Thanks for the model info. I was looking at some 3.2 cu ft models, but if a 4.5 will fit, might as well go for that. Trim work won't be an issue.
|
The only thing that you really have to watch is the height. If you want to keep your cabinet intact. My opening is 28.75"high and 23" wide.
If you don't care about the cabinet, you can remove it totally and get a maximum height of about 32" and around 29" wide (on our 2720SL). Just use the top of the fridge as your counter space.
__________________
TrailManor Elkmont
640W solar- 230AH LiFeP04 Battery
|
|
|
09-20-2022, 04:43 PM
|
#13
|
TrailManor Master
Join Date: Jan 2022
Location: San Diego, California
Posts: 2,928
|
Quote:
Originally Posted by Cya3124
Do you happen to have the exterior dims or fridge brand/model number? I want to replace our 3-way with an AC powered model as we always have electricity when we camp.
|
If you are still interested in doing this, Best Buy has a 4.5cu ft Frigidaire fridge/freezer on sale for $219.
I hate to admit it but I really screwed up in finalizing the install on my Sanyo fridge but I learned a valuable lesson that others my benefit from.
I made trim moldings to finish off the front of the cabinet and secure the fridge the same way that the original fridge was secured. I simply cut some 3/4' oak to fill the space between the cabinet and the fridge. Then I faced that with 1 1/2" x 3/4" thick molding that screwed into the space on one side and the fridge cabinet on the other. The mistake that I made was screwing the spacer into the side of the fridge with 1" long sheet metal screws. I figured, "what could it hurt, there's nothing but insulation between the sheet metal on the outside of of the fridge and the plastic interior of the fridge with about 3/4" of insulating foam in between". WRONG!!!!! Little did I know, there are refrigerant lines running back & forth in that area and I happened to puncture one and destroyed the fridge.
I spent the whole day installing the new Frigidaire fridge and trimming it out. This time, I used 3M VHB double sided tape to secure the new trim moldings to the fridge. Then screwed the trim moldings to the face of the cabinet. Now I just need to fill the screw holes and stain the wood.
__________________
TrailManor Elkmont
640W solar- 230AH LiFeP04 Battery
|
|
|
04-07-2023, 07:56 AM
|
#14
|
Member
Join Date: Feb 2021
Posts: 41
|
Radio
Came across this. Very helpful. We just bought a TM from a whole sale dealer. Our fridge is missing. So looking at installing an electric fridge as we always have power where we camp. Plus from experience the old 3ways don't cool that great on hot days.
Question; Did you keep the old fridge fan? was thinking of removing it to aid in installing the new fridge further back. But thought it might help in removing the hot air that the compressor makes on very hot days. Plan on fiber glassing the inside of the vent covers too. As those will not be needed. Will help with insulation of the camper. What did you do with the radio? I was thinking of mounting it inside the cabinet under the sink.
They now have separate freeze door fridges that will fit in that opening. Found one on Walmart for $96.
|
|
|
04-07-2023, 02:00 PM
|
#15
|
TrailManor Master
Join Date: Aug 2015
Location: Rochester, NY
Posts: 1,891
|
Link to that $96 fridge?
|
|
|
04-07-2023, 08:03 PM
|
#16
|
Member
Join Date: Feb 2021
Posts: 41
|
smaller fridge
Quote:
Originally Posted by Shane826
Link to that $96 fridge?
|
It is a little bit smaller. But you can't beat the price. It is narrower than the 4.0 fridge. But will get the job done.
https://www.walmart.com/ip/3-2-Ft-Mi...eel/1786556897
The best one I could find for the bigger size is this Frigidaire from Best Buy. It's on sale for $219. Was looking for one that could hold a gallon jug of water and has a freezer compartment so I can freeze my gel pack for the cooler.
https://www.bestbuy.com/site/frigida...?skuId=6257384
|
|
|
04-10-2023, 12:59 PM
|
#17
|
TrailManor Master
Join Date: Jan 2022
Location: San Diego, California
Posts: 2,928
|
Quote:
Originally Posted by Househunterlives
Came across this. Very helpful. We just bought a TM from a whole sale dealer. Our fridge is missing. So looking at installing an electric fridge as we always have power where we camp. Plus from experience the old 3ways don't cool that great on hot days.
Question; Did you keep the old fridge fan? was thinking of removing it to aid in installing the new fridge further back. But thought it might help in removing the hot air that the compressor makes on very hot days. Plan on fiber glassing the inside of the vent covers too. As those will not be needed. Will help with insulation of the camper. What did you do with the radio? I was thinking of mounting it inside the cabinet under the sink.
They now have separate freeze door fridges that will fit in that opening. Found one on Walmart for $96.
|
Question;
1. Did you keep the old fridge fan. was thinking of removing it to aid in installing the new fridge further back.?..... Yes but I'll probably remove it for the same reason. Although the fridge isn't in the way at all.
2. But thought it might help in removing the hot air that the compressor makes on very hot days......... We just this minute got back from 5-days of desert camping. It reached in the 90s during the day. I never turned on the fridge fan.
3. Plan on fiber glassing the inside of the vent covers too. As those will not be needed. Will help with insulation of the camper....... I left the fridge vent covers in place. However, I did put some screen on the inside. When we desert camp (often) we tow the trailer down some rough dirt roads and haven't had an issue with dirt getting inside.
4. What did you do with the radio?....... I put it on a shelf in the garage. I may sell it. I've owned TMs for about 15 years and we've never turned on that radio.
__________________
TrailManor Elkmont
640W solar- 230AH LiFeP04 Battery
|
|
|
04-11-2023, 09:26 AM
|
#18
|
yes, they hunt lions.
Join Date: Aug 2005
Location: Reno, NV
Posts: 1,360
|
This scheme as just as effective, far less costly than my 12v.
Slightly OT from the removal and replacement pictures.
My Dometic CRX-1110 EF/S would now cost at least $1500 delivered. There seem to be a lot of larger-than Norcold "compact refrigerators", 120V-AC only, which can fit within the Norcold cut-out: A few of the smaller ones could maybe even leave the radio in place.
For around $300-400, you can buy the fridge. Aside from adequate batteries and solar, which you need for a "12v compressor" fridge anyway, you only need to add a decent Inverter - and keep all the leftover money, hundreds of dollars.
- - -
Although the running amps of these refrigerators is low, an inverter which is "rated" for less than 1500 watts continuous might fail, over time, due to the momentary stress in compressor startup cycles. Your inverter needs to be capable of delivering about 7x the running watts of a typical 120v refrigerator.
That "peak load" happens for only a small fraction of second, but it stresses the Inverter capacitors. It is my impression that may Inverters EBay, Amazon, and elsewhere) are being advertised with unrealistic peak capacities: They can maybe handle that load a few dozen times, bu the wear and tear will eventually cause it to fail.
I therefore recommend an Inverter rated for at least a "1500w continuous, 3000 peak" power delivery, to assure that it can last for all those fridge cycles.
__________________
TM='06 2619 w/5K axle, 15" Maxxis "E" tires. Plumbing protector. 800 watts solar. 600AH LiFePO4 batteries, 3500 watt inverter. CR-1110 E-F/S fridge (compressor).
TV = 2007 4runner sport, with a 36 volt "power boost".
|
|
|
04-11-2023, 10:14 AM
|
#19
|
Site Sponsor
Join Date: Oct 2004
Location: Southeast of Houston, Texas
Posts: 1,090
|
Thanks, these pictures will help me find my loose wiring connection to the front shell.
|
|
|
04-11-2023, 05:04 PM
|
#20
|
TrailManor Master
Join Date: Jan 2022
Location: San Diego, California
Posts: 2,928
|
Quote:
Originally Posted by wbmiller3
Thanks, these pictures will help me find my loose wiring connection to the front shell.
|
Thanks for the comment.
That's actually one of the reasons that I posted all those pics. I figured that they may come in handy for other things...... . Glad to know that someone could use them.
__________________
TrailManor Elkmont
640W solar- 230AH LiFeP04 Battery
|
|
|
|
|
Currently Active Users Viewing This Thread: 3 (0 members and 3 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|