|
|
10-02-2005, 08:51 PM
|
#1
|
Guest
|
Installed Thetford Vent
We installed the Thetford vent accessory to the Electra Magic toilet. It was about $35 shipped and took an hour to install. Some minor dimpling was necessary to the interior wall to expose the threads of the vent shank for mounting the washer and nut. A 5/8 circle bit was used to cut a hole in the wall. The exterior vent is about the size of a quarter and sticks out about one half inch at the opening. It does not obstruct anything when opening and closing.
Our TM is 10 years old and had no vent except the window. This was not a 100 per cent fix but for the time and money it was a worth while improvement.
I am going to try to attach pics.
Cheri
|
|
|
10-03-2005, 04:50 PM
|
#2
|
Site Team
Join Date: Feb 2003
Location: The mountains of Scottsdale, AZ, and the beaches of Maine
Posts: 10,212
|
Cheri -
That's a nice installation. Do I understand you to say that the chrome vent hood plus all the other rubber parts and piping came from Thetford as a kit? Nice find!
Bill
|
|
|
10-03-2005, 05:40 PM
|
#3
|
Guest
|
Yes, all the parts and tubing are included. All that was required was the drill, a screw driver and a pair of plyers for pinching the hose clamps!
It came with about 3 ft of hose. I was tempted to test it by runniing the hose past the bathroom wall and poking it out under the velcro flap by the kitchen sink to see if it worked before drilling a hole in the wall but my husband was so sure that it would be an improvement that he just went ahead and installed it ..and he was right.
|
|
|
10-03-2005, 05:52 PM
|
#4
|
TrailManor Master
Join Date: Sep 2004
Location: NW OHIO
Posts: 267
|
Where did you buy it? The Rip
__________________
PREVIOUS ONWNER OF A 2004 3023 Trailmanor 2004 1500 Dodge Ram Quad Cab Timbren SES and Supersprings 4-Rancho RS9000X shocks 3 inch front lift kit Drawtite front hitch Valley Odyssey brake controller
:new_evil: R. V. THERE YET! New 2007 Outback Sydney 31RQS 2006 2500 Heavy Duty 4x4 Quad Cab Cummins Diesel CTD
|
|
|
10-03-2005, 06:45 PM
|
#5
|
Guest
|
I got it directly through Thetford. I stumbled upon it on their web site. Don't remember how. It wasn't so easy to find. I had them send me a picture of it to see if it would work for the TM since it is primarily for marine use. I ordered it by phone.
|
|
|
10-03-2005, 06:49 PM
|
#6
|
TrailManor Master
Join Date: Sep 2004
Location: NW OHIO
Posts: 267
|
Thank you The Rip
__________________
PREVIOUS ONWNER OF A 2004 3023 Trailmanor 2004 1500 Dodge Ram Quad Cab Timbren SES and Supersprings 4-Rancho RS9000X shocks 3 inch front lift kit Drawtite front hitch Valley Odyssey brake controller
:new_evil: R. V. THERE YET! New 2007 Outback Sydney 31RQS 2006 2500 Heavy Duty 4x4 Quad Cab Cummins Diesel CTD
|
|
|
10-03-2005, 07:02 PM
|
#7
|
Guest
|
The vent kit part # is 05223.
|
|
|
10-03-2005, 09:11 PM
|
#8
|
Site Sponsor
Join Date: Jun 2003
Location: Santa Cruz County, CA
Posts: 2,405
|
Looks like a nice job!
Please let us know how it works for you.
Dee
__________________
'97 2720 & '01 Chevy Silverado 1500 4x4
2011 & 2017 Prii, 10'x18' & 10'x9' Tents
|
|
|
10-03-2005, 09:22 PM
|
#9
|
Guest
|
We were in it last weekend and noticed the difference. And trust me, if you go outside and get your nose near the vent, you will know exactly what you are missing. . Again, it isn't a 100 per cent fix but it is signifigant.
Cheri
|
|
|
01-17-2012, 09:32 AM
|
#10
|
BannedUsers
Join Date: Dec 2011
Posts: 32
|
I was reading through your post on the thetford vent you posted back in 2005 and was wondering if you can tell me your overall expierience with the device... do you think this is a worth while project? does it do what its name implies? vents toilet gases? lastly how well does it vent if you could rate it 1-10... 10 being the best. thanks
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
All times are GMT -6. The time now is 06:45 AM.