Shower drain

I have aleviated a slow shower in our 2619, but I came across something. There is a small aluminum box that has the shower "P" trap drain inside. I could not get my monkey wrench on the nut as it was too small, but I don't see getting anything bigger up there to loosen it and remove and clean the trap.

Has anyone had this "P" trap off and how did you get it off?

Try typical drain cleaners before you remove a p trap. You can also try an old fashion plunger with some water in the shower pan.

If you still have a blockage you can buy strap type wrenches that will help with the tight fit for a regular wrench.

hope this helps and see you on the road!

PS to anyone, I am looking for a 2720SL in the Midwest, no luck so far

Roger

[mjlaupp]

You might try a basin wrench:
http://www.azpartsmaster.com/shopazp...RODUCT_ID=9660
Mike

Glenn in TN:
mjlaupp is right. The So Cal dealer had to use that tool to repair a leak on my 2007 shower.