|
|
04-27-2007, 07:21 PM
|
#2
|
Guest
|
lug size
buy a 4 way,use on tv and TM.
|
|
|
04-27-2007, 07:27 PM
|
#3
|
Guest
|
We use a folding 4 way lug wrench from Wal-Mart or Harbor Freight, I can't recall where I bought it but it was one for those two. They both have them.
|
|
|
04-28-2007, 07:05 AM
|
#4
|
Guest
|
For my TM the lugs use a 13/16" socket -- same as my TV.
I keep my 1/2" drive torque wrench in the cab in the bag with the jumper cables. The TM/TV socket stays attached to the torque wrench and I have the torque settings written on tape on th shaft of the torque wrench.
|
|
|
04-28-2007, 07:16 AM
|
#5
|
Guest
|
Idaho-Steve's idea is excellent! There is a tendency to over-torque lug nuts when using a 4-way wrench. In fact, torquing is imperative on a TV with disk brakes (Since he's using the same wrench on the TV) otherwise there's a danger of warping the disk and then the brakes will flutter. It's not as necessary on drum brakes, but it's definitely not good to over-torque the lug nuts.
|
|
|
04-28-2007, 07:34 AM
|
#6
|
TrailManor Master
Join Date: Sep 2006
Location: Florida
Posts: 1,346
|
For my Outback I had to buy a (I think calibrated) torque wrench...cost about 70.00 dollars...does this mean with a TM that type is not needed? I haven't meen out to the camper this morning to see exactly what it is...the dh uses it.
|
|
|
04-28-2007, 10:10 AM
|
#7
|
Site Team
Join Date: Feb 2003
Location: The mountains of Scottsdale, AZ, and the beaches of Maine
Posts: 10,179
|
A torque wrench is a great idea. But last time I had to change a tire, I found that the yahoo with the air wrench at the tire shop had put the nuts on so tightly that I had trouble getting them off. By using a big solid cross wrench and having my wife stand on one arm while I lifted the opposite one, we managed to break them loose. Otherwise we would have been stuck. Unless your torque wrench has a long handle, or a breaker-bar extension (and it sounds like Steve's is really husky), you might consider carrying a cross wrench tucked away somewhere, just in case.
And I can confiorm Steve's statement that 13/16 inch is the proper size.
Bill
|
|
|
04-28-2007, 10:37 AM
|
#8
|
Guest
|
I agree with Bill - you should have a cross wrench (or commonly called a star bar) and a torque wrench. I doesn't have to be that expensive ($70). Here's one at Harbor Freight that would work ($10): http://www.harborfreight.com/cpi/cta...Itemnumber=239
With wheels, the main thing is to have the torque even (around 100#) not so much the precise amount of torque. I use one of these for wheels - for engine work I use a better one.
|
|
|
04-28-2007, 11:31 AM
|
#9
|
Guest
|
Quote:
Originally Posted by Bill
A torque wrench is a great idea. But last time I had to change a tire, I found that the yahoo with the air wrench at the tire shop had put the nuts on so tightly that I had trouble getting them off. By using a big solid cross wrench and having my wife stand on one arm while I lifted the opposite one, we managed to break them loose. Otherwise we would have been stuck. Unless your torque wrench has a long handle, or a breaker-bar extension (and it sounds like Steve's is really husky), you might consider carrying a cross wrench tucked away somewhere, just in case.
And I can confiorm Steve's statement that 13/16 inch is the proper size.
Bill
|
Yes. Unfortunately, there are many tire "Yahoos" that don't properly torque lug nuts, especially on trailers. This is a result of not being properly trained. I see it all the time in my profession.
It is imperative to torque wheels correctly, especially on disc brake applications, as previousely stated. We religiously use Torque Sticks (see link below) on our impact wrenches. It solves the overtorquing problem. They are a little pricey for the regular joe to probably keep in his tool assortment. I'm really just passing the info on for education purposes for TM owners buying tires. Make sure you have your tire technician torque your wheels properly........and don't buy your tires/wheels from correctly labeled "yahoos".
http://buy1.snapon.com/catalog/item....re&dir=catalog
|
|
|
04-28-2007, 03:41 PM
|
#10
|
Guest
|
I use a torque stick, too, but on the road it's rather difficult to get the air pressure. A cheap torque wrench will do the job adequately - much better than guessing at it with a star bar!
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
All times are GMT -6. The time now is 05:21 PM.