Exterior Bracket (?)

[AysunM]

I have attached an image of the remaining bracket (?) I have on the top shell of my 2013 2720 trailmanor.

Somewhere between Texas and Colorado it sheered off and I would like to replace it if possible before I leave for Pittsburgh at the beginning of August.

If anyone has a lead on what this part is actually called or where I could get one that would be amazing.

- Carly

[Bill]

According to the Trail Manor parts catalog, it is part number 21028, Upper Hold Down. In your photo, you can see that it is attached with a strap through the middle of it, with bolts through the strap and upward into the shell. In earlier days, the strap was quite short, and had 2 bolts through it. In later days, the strap was lengthened and attached with 4 bolts. If you have only 2 bolts, you need to add two more.

Bill

[Wavery]

Originally Posted by AysunM

I have attached an image of the remaining bracket (?) I have on the top shell of my 2013 2720 trailmanor.

Somewhere between Texas and Colorado it sheered off and I would like to replace it if possible before I leave for Pittsburgh at the beginning of August.

If anyone has a lead on what this part is actually called or where I could get one that would be amazing.

- Carly

The screws are available at any hardware store. You may want to run a new screw in each of the holes and then take them back out again. If you see dark brown or black residue on the screws, you probably have a wood rot problem.

If you install a new bracket and screws, it will likely pull out again IF you have wood rot going on. It would be best to replace any/all rotted wood before installing the new bracket.

If you find that the lower frame rail on your 2013 is aluminun......... ignore this post....