|
05-15-2017, 12:56 PM
|
#1
|
Member
Join Date: May 2015
Posts: 12
|
Mattress mods - topper or inflatable?
We bought a ntu 2720 at the end of last season and love every bit of it - except the mattress. My back is usually killing me in the AM, so I'm pretty sure I need more support.
Folks on here seem to favor a mattress topper, inflatable, RV Superbag or some combo. I'm looking to minimize setup/breakdown time as I have two little ones and it takes us an hour to set up and break down as it is. I'd prefer something that can be left on the bed but sounds like clearance is a common issue.
Thus, I'm leaning towards an inflatable with a superbag, but have some questions:
1 - does your inflatable go on the mattress or underneath? If underneath, does a standard 110v pump have enough power to inflate it?
2 - what is the thinnest air mattress you've found? It seems like they are all standard 8" thickness which seems like too much when combined with the existing mattress.
3 - how warm is the RV superbag vs standard bedding? We were chilly last weekend with a sheet, comforter and blanket (40 degree low) so I was thinking of getting a heated blanket.
Thanks all!
Mike
|
|
|
05-15-2017, 01:19 PM
|
#2
|
TrailManor Master
Join Date: Nov 2016
Location: Vancouver BC
Posts: 1,522
|
The previous owner put a thin piece of reflective insulation material on the bottom of the mattress. I'm planning to make a larger version with Velcro so that I can bring it up and over the seal between the shell and bed, kind of like a vapour barrier.
|
|
|
05-15-2017, 02:21 PM
|
#3
|
TrailManor Master
Join Date: Aug 2015
Location: Rochester, NY
Posts: 1,840
|
I was gonna mention something similar about insulating the bottom of the bed. Can't help as far as modding the mattress goes. But it's on my list of stuff... I'm actually thinking about having a piece of memory foam cut to size.
__________________
2007/21 TM 3326 (Pride of the Fleet)
2000 2720SL (Rebuild Project)
2002 2619 (Parts TM)
SMARTER THAN GOOGLE!
|
|
|
05-15-2017, 03:33 PM
|
#4
|
TrailManor Master
Join Date: Oct 2011
Location: New Braunfels, Texas
Posts: 919
|
Quote:
Originally Posted by Larryjb
The previous owner put a thin piece of reflective insulation material on the bottom of the mattress. I'm planning to make a larger version with Velcro so that I can bring it up and over the seal between the shell and bed, kind of like a vapour barrier.
|
In cold weather, we use an electric blanket , under the sheets, to warm us while sleeping. The bed areas get cold due to the cantilever aspect. Cold air below the bed slide, keeps the bed cold and colder as the night goes to morning.
__________________
rvcycleguy
TM-2002 3124KB
TV-2003 Toyota Tundra V8 4.7L. Fact. Tow Pkg, air bags
2006 Suzuki Boulevard C50c Motorcycle- crashed- parted out
1956 Royal Enfield Bullet 500 Motorcycle-sold
2006 Harley Road King
|
|
|
05-15-2017, 10:00 PM
|
#5
|
Site Sponsor
Join Date: Mar 2015
Location: Everett, WA
Posts: 213
|
combo
For our back bed we did this:
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
currently unavailable. Ours was the first review. It's not as soft as our home bed, but softer than the stock mattress.
"This has worked well in our trailer. Right size, not too firm, not too soft, not too heavy. I like the idea of the gel, because the memory foam is famous for retaining heat. It is pretty good eliminating motion transfer as well."
For our front bed we just put this up there:
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
It's a combination of air mattress and memory foam. Nobody has actually spent the night on it yet, but it seems like it might work well.
__________________
TM: 2007 2720 (QB) TV: 2010 Toyota Highlander Hybrid
Hopkins INSIGHT brake controller, Andersen No-Sway WDH
CARCHET Solar Powered TMPS
Dometic CRX-1110 AC/DC Compressor Fridge, 200 W Solar
|
|
|
05-20-2017, 07:53 AM
|
#6
|
Member
Join Date: May 2015
Posts: 12
|
Thanks everybody for the great ideas!
|
|
|
05-20-2017, 08:39 PM
|
#7
|
TrailManor Master
Join Date: Apr 2012
Location: Centennial, Colorado
Posts: 885
|
I took our mattress out, and just used the Coleman air mattress with 3" egg-crate topper. It took 3 minutes to inflate both mattresses (we had the 4-in-1). Much better than the original mattress!
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
All times are GMT -6. The time now is 02:01 AM.