|
|
02-11-2005, 10:59 AM
|
#1
|
Guest
|
Hitch height?
Does anyone know what the hitch height, measured at the tongue with the trailer level is? I need to know this before I buy a ball platform.
[email protected]
|
|
|
02-11-2005, 12:35 PM
|
#2
|
Guest
|
Hitch Height
I have a 2005 3124KB and when level the height is 19" from the ground to the top of the ball.
But, remember these two things -
1. Our 3124KB came from the factory with the 2" lift allready installed - I think that the 2720's and the 2619's do not come with this lift unless you order it as an option or add it later - So if you do not have the lift kit then subtract 2".
2. This does not account for the tounge weight of your TM pushing down on the suspension of whatever type of tow vehicle you have - this can make a big differance as to what hitch you need to buy to make your rig level!!!
Hope this helps
Brad
2003 Chevy Astro AWD
2005 3124 KB
Equalizer Hitch
|
|
|
02-11-2005, 04:02 PM
|
#3
|
Guest
|
Hitch
That's curious... My Tow Vehicle is a 97 Ford Explorer so any kind of drop hitch should be ruled out. That's why I was wondering because if I can get an accurate measure I can add an inch or two on the up side which will compensate for a loaded trailer and be able to keep the whole thing level.
|
|
|
02-11-2005, 05:06 PM
|
#4
|
Guest
|
Most ball mounts now a days come in an "L" shape allowing for moving up or down as needed. You do need a strong arm and a good sized wrench to do it but I'm sure any trailer shop has that.
|
|
|
02-11-2005, 05:17 PM
|
#5
|
TrailManor Master
Join Date: Jul 2001
Location: Colorado Springs, CO
Posts: 816
|
Don't use a standard drop hitch...use a WDH
Quote:
Originally Posted by RealJeep
That's curious... My Tow Vehicle is a 97 Ford Explorer so any kind of drop hitch should be ruled out. That's why I was wondering because if I can get an accurate measure I can add an inch or two on the up side which will compensate for a loaded trailer and be able to keep the whole thing level.
|
Safe towing of any TrailManor with a '97 Explorer is going to require use of a Weight Distributing Hitch (WDH). All WDHs have a great deal of height adjustability...as Windbreaker notes, all you will need are a pair of very heavy duty wrenches and you'll be able to properly set the ball height to achieve a level trailer... after you use the WDH's spring bars to level the Explorer.
__________________
Ray
I use my TM as a base camp for hiking, kayaking, mountain biking, and climbing Colorado's 14ers
The Trailer: 2002 TM Model 2720SL ( Mods: Solar Panels (170 Watts), Dual T-105 Batteries, Electric Tongue Jack, Side AC, Programmable Thermostat, Doran TP Monitor System)
The Tow Vehicle: 2003 Toyota Tundra V8 SR5 4X4 w/Tow Package (Towing & Performance Mods: JBA Headers, Gibson Muffler, 4.30 gears, Michelin LTX M/S Tires, Prodigy Brake Controller, Transmission Temperature Gauge)
|
|
|
02-11-2005, 06:37 PM
|
#6
|
Guest
|
Wdh
See, I knew I'd find enlightenment if I sought after it in the right place. So, a WDH it will be...Any other trailering sage wisdom y'all would want to share with me would be greatly appreciated.
Otto
|
|
|
02-11-2005, 07:31 PM
|
#8
|
Site Team
Join Date: Feb 2003
Location: The mountains of Scottsdale, AZ, and the beaches of Maine
Posts: 10,185
|
Many people like the Equalizer.
The old standbys are Reese and Draw-Tite. My Reese is great.
Maybe EAZ-Lift.
Hensley is great, but VERY expensive.
Google is your friend.
You will need capacity of 600 pounds minimum, 800 pounds is OK.
You probably do NOT need sway control.
What kind of tow vehicle do you have?
Bill
|
|
|
02-12-2005, 06:52 AM
|
#9
|
Guest
|
More...
Thanks Bill and Leon,
Your advice is well taken and appreciated. My TV will be a 97 Ford Explorer 4x4 with a trailer weight rating of 5,600 Lbs and a GCWR of 10K Lbs. It's a small vehicle with lots of grunt but still too small for pulling a hardshell camper. I'll probably buy a 2720 or 3023 as soon as I can find a nice one. The WDH sounds like a great idea and I'll be shopping for one soon.
Thanks,
Otto
|
|
|
02-12-2005, 03:20 PM
|
#10
|
Guest
|
One other source...
You might also try HitchesOnline.com. They happen to be a local company to me, but also sell online. I bought my WDH from them, as well as my Prodigy brake controller. My WDH is their stock #750A6010, $250. Prodigy was $110 + $48 for additional wiring loom to hook things up.
I paid no shipping, of course, but with the WDH this will be no small item. I was astounded when I first picked up the box - think it's like 85 lbs.
I like my setup so far, although admittedly have only about 350 miles on it.
Good luck!
Steve
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|