|
08-11-2013, 07:54 AM
|
#1
|
TrailManor Master
Join Date: Sep 2010
Location: Jo-juh
Posts: 420
|
Awning bracket repair
While in storage it appears that the front awning bracket was knocked off.
What is the best way to reinstall/repair?
Thank you in advance.
__________________
Mark
'20 Ford F250 Lariat 6.7 L 4WD (Herschel)
'22 Keystone Cougar 32BHS 5er (Mellencamper)
'01 Ford Excursion Limited 7.3 L PSD 4WD (Rudolph) (Sold)
'18 Keystone Cougar 29BHS (Sold)
'15 Prime Tracer 25BHS (Traded)
'06 TrailManor 2619 (Traded)
:cwmddd:
|
|
|
08-11-2013, 08:55 AM
|
#2
|
TrailManor Master
Join Date: Jul 2011
Location: Central Texas
Posts: 489
|
I suspect in addition to the aluminum skin damage, you probably have some internal issues where the screws pulled out.
You may want to look at my attachment in the linked post http://www.trailmanorowners.com/foru...ht=cleat+latch for some ideas on repair.
If you have questions, I'll be happy to answer. Good luck!
Dave
|
|
|
08-11-2013, 02:17 PM
|
#3
|
TrailManor Master
Join Date: Oct 2010
Location: Big Bend area, Florida
Posts: 2,120
|
Screws, elastic lock nuts, and fender washers if you don't mind going all the way through the wall. Put the screw heads and fender washers inside the camper. Paint to match before installing.
__________________
Axis 24.1 E 450 chassis, 6 spd tranny. GVWR 14500# GVCWR 22000 # GW(scales) 12400 #
[SIGPIC][/SIGPIC]
mods: 2- 100 watt solar panels, on roof, 300 watts portable
“They who would give up essential Liberty, to purchase a little temporary Safety, deserve neither Liberty nor Safety.” Benjamin Franklin
|
|
|
08-16-2013, 01:30 PM
|
#4
|
TrailManor Master
Join Date: Sep 2010
Location: Jo-juh
Posts: 420
|
New cleat also
Quote:
Originally Posted by davlin
I suspect in addition to the aluminum skin damage, you probably have some internal issues where the screws pulled out.
You may want to look at my attachment in the linked post http://www.trailmanorowners.com/foru...ht=cleat+latch for some ideas on repair.
If you have questions, I'll be happy to answer. Good luck!
Dave
|
Awesome write-up. Also need a new cleat, when it was impacted it ripped off the bottom (bezel?) thing a ma jiggy.
See picture.
Was told (by local rv dealer) Fiamma was purchased by someone and would be better to find online.
__________________
Mark
'20 Ford F250 Lariat 6.7 L 4WD (Herschel)
'22 Keystone Cougar 32BHS 5er (Mellencamper)
'01 Ford Excursion Limited 7.3 L PSD 4WD (Rudolph) (Sold)
'18 Keystone Cougar 29BHS (Sold)
'15 Prime Tracer 25BHS (Traded)
'06 TrailManor 2619 (Traded)
:cwmddd:
|
|
|
08-17-2013, 03:59 PM
|
#6
|
TrailManor Master
Join Date: Sep 2010
Location: Jo-juh
Posts: 420
|
Quote:
Originally Posted by davlin
|
Thanks, I kept looking at the FIAMMA site and not the FIAMMA USA site.
Big Help.
__________________
Mark
'20 Ford F250 Lariat 6.7 L 4WD (Herschel)
'22 Keystone Cougar 32BHS 5er (Mellencamper)
'01 Ford Excursion Limited 7.3 L PSD 4WD (Rudolph) (Sold)
'18 Keystone Cougar 29BHS (Sold)
'15 Prime Tracer 25BHS (Traded)
'06 TrailManor 2619 (Traded)
:cwmddd:
|
|
|
09-19-2013, 05:26 PM
|
#7
|
TrailManor Master
Join Date: Sep 2010
Location: Jo-juh
Posts: 420
|
Repair completed
Quote:
Originally Posted by davlin
I suspect in addition to the aluminum skin damage, you probably have some internal issues where the screws pulled out.
You may want to look at my attachment in the linked post http://www.trailmanorowners.com/foru...ht=cleat+latch for some ideas on repair.
If you have questions, I'll be happy to answer. Good luck!
Dave
|
The newly designed wall bracket is different but here it is installed prior to painting. Thanks for the excellent write up.
Took longer than expected, had to assemble parts, wait til dw was out of town to have access to driveway, get motivated, etc.
__________________
Mark
'20 Ford F250 Lariat 6.7 L 4WD (Herschel)
'22 Keystone Cougar 32BHS 5er (Mellencamper)
'01 Ford Excursion Limited 7.3 L PSD 4WD (Rudolph) (Sold)
'18 Keystone Cougar 29BHS (Sold)
'15 Prime Tracer 25BHS (Traded)
'06 TrailManor 2619 (Traded)
:cwmddd:
|
|
|
09-19-2013, 06:25 PM
|
#8
|
TrailManor Master
Join Date: Jul 2011
Location: Central Texas
Posts: 489
|
Terrific job! Better than new!
Dave
|
|
|
09-19-2013, 08:51 PM
|
#9
|
Site Sponsor
Join Date: Mar 2013
Location: Wisconsin
Posts: 538
|
Quote:
Originally Posted by mecicon
The newly designed wall bracket is different but here it is installed prior to painting
.
|
I'm curious how it fits in there....is there some sort of clip to hold it in like the original that has the round bar that slides down over it to lock the bracket in place?
__________________
Sara & Sophie
(RIP Bailey - 12/6/2020)
Welcome Sophie DOB 1/5/2021
Mini Goldendoodle (who's not so mini)
New to me 2010. 2720SD TrailManor
New to me 2010 Chevy Traverse
Both purchased July 2013
Factory installed 80W solar panel.
New batteries June 30th 2018.
(SLIGC115 Duracell Ultra 6V Deep Cycle Golf Cart Battery x 2)
New bag seals Sept 2020
Rohent R7 HD 1080P RV Wireless Backup Camera Installed Sept 2020
|
|
|
09-21-2013, 04:14 AM
|
#10
|
TrailManor Master
Join Date: Sep 2010
Location: Jo-juh
Posts: 420
|
New bracket design
Quote:
Originally Posted by Bailey'sMom
I'm curious how it fits in there....is there some sort of clip to hold it in like the original that has the round bar that slides down over it to lock the bracket in place?
|
The area that has the FIAMMA brand on it slides up, you insert the awning leg clip.
__________________
Mark
'20 Ford F250 Lariat 6.7 L 4WD (Herschel)
'22 Keystone Cougar 32BHS 5er (Mellencamper)
'01 Ford Excursion Limited 7.3 L PSD 4WD (Rudolph) (Sold)
'18 Keystone Cougar 29BHS (Sold)
'15 Prime Tracer 25BHS (Traded)
'06 TrailManor 2619 (Traded)
:cwmddd:
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
All times are GMT -6. The time now is 10:42 AM.