TrailManor Owner's Forum  

Go Back   TrailManor Owner's Forum > TrailManor Technical Discussions > General Maintenance and Cleaning
Register FAQ Members List Calendar

Reply
 
Thread Tools Display Modes
Old 11-29-2010, 01:20 PM   #1
ShrimpBurrito
Site Sponsor
 
ShrimpBurrito's Avatar
 
Join Date: Jul 2006
Location: Sunny Beaches of Los Angeles
Posts: 3,279
Default Anyone use a cover from the Car Show? Or any other high quality covers (not ADCO)?

As I was putting my Adco cover on my TM last week, my hand went right through one of the seams where the side meets the roof. I've had it about 3 years, and although this is the first time it has ripped due to deterioration, it has not kept water or even dust out for probably the last 2 years. I'd clean the roof, cover the TM, and then a month or so later the roof looks like I never washed it. It also lets in a fair amount of sun. So I consider it a 1-2 year cover at best, at least in Southern California.

I think I am going to get a cover made from Sunbrella. Calmark Covers sells custom covers made from it, and everything I've read on other forums points to them being top notch, both in customer service and cover quality. The downside, of course, is cost. Based on prices on some of their stock covers for other units, my guess is it will cost somewhere in the $500-$600 range. But this stuff has a 6-year warranty. So if I spent $150 on an ADCO cover that gives me 18 months of protection, the Calmark cover is actually cheaper, and I'll have a higher quality cover to boot.

I thought I remembered seeing someone here reporting that they bought a cover from The Car Show, perhaps even sharing a picture, but I cannot find the post. I called them and their cover is made locally, and costs $600 + shipping, but he wasn't sure what they were made from exactly except that it was a boat-cover material. He was going to call the guy that makes them to find out. Anyone have any experience with their cover, or any other high quality non-Adco cover?

Thanks,
Dave
__________________
2000 2720SL & 2007 3124KB
2005 Toyota Sequoia
Twin Battle Born 12v 100Ah LiFePO4 (BBGC2) batteries, 300W solar on rear shell, Link 10, Lift kit, Maxxis 8008 225 75/R15 E tires
ShrimpBurrito is offline   Reply With Quote
Old 11-30-2010, 07:56 AM   #2
allenj
Guest
 
Posts: n/a
Default

I'm also curious, I feel like you can practically see through our 2 year old Adco cover, and every pressure point from underneath (antenna, AC etc) is breaking through faster than I can reinforce the tears with duct tape. So I'll be in the market for some kind of replacement next year. If I weren't worried about condensation I would be tempted just to go with a tarp like some posters in another recent thread.
  Reply With Quote
Old 12-03-2010, 08:26 PM   #3
YogiCorgi
Guest
 
Posts: n/a
Default

Quote:
Originally Posted by ShrimpBurrito View Post
As I was putting my Adco cover on my TM last week, my hand went right through one of the seams where the side meets the roof. I've had it about 3 years, and although this is the first time it has ripped due to deterioration, it has not kept water or even dust out for probably the last 2 years. I'd clean the roof, cover the TM, and then a month or so later the roof looks like I never washed it. It also lets in a fair amount of sun. So I consider it a 1-2 year cover at best, at least in Southern California.

I think I am going to get a cover made from Sunbrella. Calmark Covers sells custom covers made from it, and everything I've read on other forums points to them being top notch, both in customer service and cover quality. The downside, of course, is cost. Based on prices on some of their stock covers for other units, my guess is it will cost somewhere in the $500-$600 range. But this stuff has a 6-year warranty. So if I spent $150 on an ADCO cover that gives me 18 months of protection, the Calmark cover is actually cheaper, and I'll have a higher quality cover to boot.

I thought I remembered seeing someone here reporting that they bought a cover from The Car Show, perhaps even sharing a picture, but I cannot find the post. I called them and their cover is made locally, and costs $600 + shipping, but he wasn't sure what they were made from exactly except that it was a boat-cover material. He was going to call the guy that makes them to find out. Anyone have any experience with their cover, or any other high quality non-Adco cover?

Thanks,
Dave
Hello All,

I feel the same way about Adco covers and as a new TM owner I'm researching alternatives as well. I also want to store my 3124ks expanded so I can easily check on things and/or provide added protection for long-duration camping. If anyone stores their TM expanded with a cover, I would love feedback on this arrangement. In the mean time, here's a cover that I'm currently researching...any thoughts on this one?

http://www.rvcoversprotect.com/polyxtraveltrailer

This product is also sold by NorthernTool, but it's more expensive at that location.
  Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Which ADCO cover for 2720SL? Virginia Deacon General Maintenance and Cleaning 35 04-22-2009 02:19 PM
Adco cover for 3124ks customshein Exterior 7 10-08-2008 04:48 PM
Cover for 3124KB M3 Rules General Maintenance and Cleaning 1 06-23-2008 08:09 AM
How to cover a TM in storage Bill TrailManor Technical Library 0 10-03-2005 04:30 PM


All times are GMT -6. The time now is 12:22 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 2022 Trailmanor Owners Page.