Have you decided yet? Ours is an ADCO cover we bought from another
member/owner here. I just checked the part number on our cover and then
checked the ADCO website. Evidently, they don't make/sell our part number
cover anymore(22845).
However, from the website a very similar cover is
Hi-Lo Dupont Tyvek® RV
Part # Length Cover Dimensions (L x W x H)
22852 Up to 22' 6" (Up to 24' Model) 273" x 104" x 60"
http://www.adcoprod.com/Universal-RV...i-Lo-RV-Covers
For our 2720, the cover we have is not quite wide enough for the front shell.
The Tyvek roof doesn't completely cover the shell, edge to edge.
It just barely covers the rear shell, edge to edge. The Tyvek(white) is needed
to help the rain run off as well as protection from the sun.
But not being wide enough, now there's a seam where the Tyvek meets
the gray side fabric before the vertical drop.
This misfit is exaggerated by our attempt to help the rain run off by adding
a styrofoam shipping box(12x12x12 for mail delivery of insulin) under the
cover and with a 10 ft long piece of PVC pipe bridging from roof A/C to
the styrofoam box. This creates a ridge in the roof section so the cover sloaps
to the edges.
I wish the Tyvek section was wider. But if I were to find a cover with wider
Tyvek, then the side walls would likely be too tall and fall to the ground
creating another challenge of blousing the bottom of the walls. I can't
justify a custom fit cover at this time. We too don't have unlimited $$.
As far as length, it just barely covers the horizontal propane bottles.
We bought the cover cheap and it does suit its purpose for now.
Tell us what you decided to buy/make.
__________________
dab1950 = Doug and Sue
2006 2720SL, 15" wheels, swing tongue, electric stab jacks(very nice).
New Dometic(Atwood) Aircommand A/C(2019).
2018 Toyota Highlander, WDH, Primus IQ BC.
2008 Dodge Durango-sold
Honda EU2200i Inverter/generator
1996 Playbouy Pontoon boat. 50 HP Tohatsu OB.
"Love to Sail", "Love to fish", "Love to camp".
Albums